<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>BLOG記事用論壇 - 3D Printer 3D印表機&amp;雷射雕刻</title>
    <link>https://www.wwetw.com/forum-80-1.html</link>
    <description>Latest 20 threads of 3D Printer 3D印表機&amp;雷射雕刻</description>
    <copyright>Copyright(C) BLOG記事用論壇</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 24 Aug 2026 13:36:17 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.wwetw.com/static/image/common/logo_88_31.gif</url>
      <title>BLOG記事用論壇</title>
      <link>https://www.wwetw.com/</link>
    </image>
    <item>
      <title>3D印表機 加熱棒溫度異常</title>
      <link>https://www.wwetw.com/thread-338-1-1.html</link>
      <description><![CDATA[組裝3D印表機到後面階段
在測試加熱頭的時候
要調整PID卻發現加熱異常
無法加熱到200度

調整時拿了3個加熱棒
加熱棒A：瓦數不明
加熱棒B：12V，40W
加熱棒C 12V，40W

加熱棒A，只能加熱到130幾度就停止上不去
原本以為買到24V的加熱棒
所以重新買了1個12V瓦數40W的加 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Sun, 10 May 2020 05:20:52 +0000</pubDate>
    </item>
    <item>
      <title>Ramps 1.4 主機板 驅動版 arduino 5V燒壞</title>
      <link>https://www.wwetw.com/thread-337-1-1.html</link>
      <description><![CDATA[Ramps 1.4 主機板使用時
我直接拿3用電表量測接endstop點位的5V+與GND
原本是想說要測試電壓正不正確
有聽到很小的滋一聲，然後下一秒LCD螢幕就不亮了
google後發現 arduino插上IE1394的USB可以點亮LCD
原因是因為Arduino上面轉換5V的AMS 1117燒掉
因此需要外部電源提供 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Mon, 04 May 2020 07:12:04 +0000</pubDate>
    </item>
    <item>
      <title>3D印表機 Marlin韌體調整加熱PID</title>
      <link>https://www.wwetw.com/thread-336-1-1.html</link>
      <description><![CDATA[使用Repetier-Host自動PID調整

M303 C10 E0 S200
不過卻出現了加熱失敗
原因是加熱時間過長
原本以為是KP過低或是更改加熱時間
這邊增加KP改為50後發現還是不行
預設
原因應該是因為加熱棒買錯24V的，
用12V的電源加熱電流上不去
因此決定重買一個12V的加熱頭。
後來發 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Sat, 02 May 2020 13:38:23 +0000</pubDate>
    </item>
    <item>
      <title>3D印表機 組裝</title>
      <link>https://www.wwetw.com/thread-335-1-1.html</link>
      <description><![CDATA[首先組合框架，上方與下方各一


將線性滑軌鎖上
前後端安裝擋塊避免脫軌
上方安裝光學sensor
用游標尺量距離鋁擠30mm


再來組裝上方墮輪


馬達因為必較重安裝在下方比較穩
馬達上的齒輪安裝依照圖面量測距離頂部2mm


最後組裝起來


再來就是安裝噴頭並聯桿了 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Mon, 27 Apr 2020 04:27:54 +0000</pubDate>
    </item>
    <item>
      <title>Cubiio文件格式</title>
      <link>https://www.wwetw.com/thread-318-1-1.html</link>
      <description><![CDATA[圖片檔案(bmp格式)
1. Bitmap (bmp) 
Resolution: 254 dpi, (10 pixel/mm) 
Pixel format：8、24、32 Bit. , uncompressed 
Size Limit: 1000 x 1000 (pixel)

G-code文字檔案(txt格式)
2. Vector graphics (G-code) 
Suggestion: We suggest users to set power and  ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Fri, 27 Apr 2018 08:21:24 +0000</pubDate>
    </item>
    <item>
      <title>Cubiio 防護罩，箱型雕刻測試</title>
      <link>https://www.wwetw.com/thread-315-1-1.html</link>
      <description><![CDATA[相關文章:
]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Tue, 16 Jan 2018 09:03:54 +0000</pubDate>
    </item>
    <item>
      <title>Cubiio雷射雕刻機 開箱 心得</title>
      <link>https://www.wwetw.com/thread-314-1-1.html</link>
      <description><![CDATA[相關文章:
        Cubiio 箱型雕刻測試

Cubiio雷射雕刻機，
主打掌上型小型雷射雕刻機，攜帶便利。
台灣時間8/15 22:00於kickstarter上募資，
最後到9/20共有3,432 backers 總募資 $1,373,680美金。
募資達成的額外獎勵如下
1. $200K - 新手材料包:4x4\&quot;紙張+密迪板， ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Mon, 15 Jan 2018 07:02:15 +0000</pubDate>
    </item>
    <item>
      <title>RAMPS 1.4 與 A4988 使用</title>
      <link>https://www.wwetw.com/thread-312-1-1.html</link>
      <description><![CDATA[RAMPS 1.4 是一擴充版，必須搭配Arduino Mega2560 使用
A4988為步進馬達驅動片，插在RAMPS 1.4上

兩者組合起來可接5顆馬達，
拿來給3D印表機使用可包含XYZ軸與2個擠出機。

RAMPS 1.4腳位及接線圖參考
http://reprap.org/wiki/RAMPS_1.4
http://reprap.org/mediawiki/i ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Wed, 19 Jul 2017 11:09:23 +0000</pubDate>
    </item>
    <item>
      <title>STL格式說明</title>
      <link>https://www.wwetw.com/thread-304-1-1.html</link>
      <description><![CDATA[STL檔案是由三角座標形成
是文字檔
類似網格mesh
每個三角形包含3個點與一個方向向量，
用來表示面形成的面試內側還外側
詳細可看
https://read01.com/J8nRxK.html

範例
正四面體

用記事本打開後如下
可觀察到由四個面組成因為STL檔案以三角形網格組成
所以其用來表示 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Thu, 19 Jan 2017 06:32:12 +0000</pubDate>
    </item>
    <item>
      <title>3D 列印 非平面層高</title>
      <link>https://www.wwetw.com/thread-303-1-1.html</link>
      <description><![CDATA[還沒時間研究，先參考
http://hackaday.com/2016/07/27/3d-printering-non-planar-layer-fdm/#more-215376]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Thu, 12 Jan 2017 07:24:59 +0000</pubDate>
    </item>
    <item>
      <title>Micromake 3D Printer 分析 3D印表機解析 Part 3 電路</title>
      <link>https://www.wwetw.com/thread-299-1-1.html</link>
      <description><![CDATA[這章講解電路
電路板吃12V電源
接頭包含4個步進馬達驅動器
3個控制3軸，1個控制擠出馬達
4個微動開關感測


加熱頭溫度控制部分
包含12V風扇、熱敏電阻(用來感測溫度)、加熱頭

電路板連接LCD螢幕
可以即時監控目前溫度與列印狀況。
也可以由旋鈕進入選單做控制調整
可 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Wed, 06 Jul 2016 14:20:28 +0000</pubDate>
    </item>
    <item>
      <title>Micromake 3D Printer 分析 3D印表機解析 Part 2</title>
      <link>https://www.wwetw.com/thread-297-1-1.html</link>
      <description><![CDATA[3軸做好了之後，這3軸要如何移動噴頭呢?
笛卡爾座標的XYZ三軸個互相垂直移動的，
而Delta 3D Printer的3軸是平行的。
關鍵點在於用到了平行四連桿機構來移動噴頭
3組平行四連桿確保噴頭為水平狀態

圖 平行四連桿

線材擠出:
送料進入噴頭也需要一顆馬達，
使用齒輪摩擦 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Sun, 12 Jun 2016 14:13:14 +0000</pubDate>
    </item>
    <item>
      <title>Micromake 3D Printer 分析 3D印表機解析 Part 1 開箱使用心得</title>
      <link>https://www.wwetw.com/thread-296-1-1.html</link>
      <description><![CDATA[買了一台Micromake 3D Printer
有加購線性滑軌，
解析一下使用的材料與組裝會碰到的一些問題
順便分析3D印表機使用的材料
(購買須自行組裝)

首先這台3D印表機為FDM，
也就是熔融沉積，可以參考維基百科
簡單說把塑膠融化成液態擠出，
再一層一層疊起來形成3D模型。
就 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Wed, 08 Jun 2016 05:56:48 +0000</pubDate>
    </item>
    <item>
      <title>FLUX 漢字書寫產生器</title>
      <link>https://www.wwetw.com/thread-295-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Sat, 28 May 2016 14:28:27 +0000</pubDate>
    </item>
    <item>
      <title>Reprap (Marlin) 機器的G code</title>
      <link>https://www.wwetw.com/thread-294-1-1.html</link>
      <description><![CDATA[我一開始學G code是用來控制CNC機器的語言
而Marlin原始碼所提供的G code用來控制3D印表機
和原始CNC的是不同的，但用法相同
http://reprap.org/wiki/G-code

在一段完整的3D列印程式碼中
會有起始star和中止end G code

起始start G code:是用來初始化，使列印頭歸位、 ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Tue, 24 May 2016 10:52:55 +0000</pubDate>
    </item>
    <item>
      <title>SVG轉G code 給3D印表機寫字用</title>
      <link>https://www.wwetw.com/thread-293-1-1.html</link>
      <description><![CDATA[由FLUX寫的 漢字書寫產生器
http://software.flux3dp.com/hand_writer/
可以將中文字轉換成SVG檔案
目前想要讓我的機器能握筆寫字
然而要將此檔案改為G coede才能給我的機器使用

首先要知道3D印表機G code與CNCG code的不同
這裡使用reprap的http://reprap.org/wiki/G- ...]]></description>
      <category>3D Printer 3D印表機&amp;雷射雕刻</category>
      <author>admin</author>
      <pubDate>Tue, 24 May 2016 07:06:58 +0000</pubDate>
    </item>
  </channel>
</rss>